The optimised mechanical properties of AE44 are compared with those of other Mg die-casting alloys and an Al die-casting alloy and new application perspectives in the automotive industry
.This paper presents a re-evaluation of the room temperature mechanical properties and high temperature creep resistance of magnesium die-casting alloy AE44 (Mg
Sources: Hydro Magnesium September 2005, ASM Handbook; Magnesium amp; Magnesium Alloys, Dead Sea Magnesium, Noranda Magnesium Data The mechanical properties of a die cast
.This thesis aims to study the local mechanical properties of high pressure die cast (HPDC) AE44-2 and AE44-4 alloys at 25˚C and 200˚C and their microstructures.
It is shown that the Mn-containing AE44 exhibits distinct age hardening response upon direct ageing (T5) due to the precipitation of nanoscale Al-Mn particles, as reported previously in a
Research limitations/implications: Future researches should contain investigations of the influence of the hot chamber die casting process parameters on the microstructure and mechanical
Among these alloys, new Mg-4Al-4RE (AE44) alloy combines excellent die-casting properties with satisfactory creep resistance. Consequently, AE44 alloy is being considered for structural
This paper presents a re-evaluation of the room temperature mechanical properties and high temperature creep resistance of magnesium die-casting alloy AE44 (Mg-4Al-4RE) in light of
The tensile properties of high-pressure die-cast Mg-6Al-0.3Mn (AM60), Mg-9Al-1Zn (AZ91), and Mg-4Al-4RE (AE44), under strain rates ranging from 10-6 to 10-1 s-1 have been investigated.
AbstrAct Purpose: AE44 magnesium alloy allows attractive high temperature mechanical properties, as well as die-castability and good corrosion resistance. It contains magnesium,
.Magnesium or Mg Alloys are typically preferred by manufacturers in aerospace and car manufacturing industries considering they weigh ⅓ lower than aluminum. So what is
Y. Fasoyinu, R. Bouchard, T. Castles, M. Sahoo and P. Labelle, quot;Mechanical Properties of High Pressure Die Cast Magnesium Alloys AE42 and Noranda New Alloy (Aj52X) for High
.This paper presents a re-evaluation of the room temperature mechanical properties and high temperature creep resistance of magnesium die-casting alloy AE44 (Mg
The manufacturing and properties of the AE44 magnesium alloy reinforced with SiC−Al2O3−SiO2 ceramic foam were studied. The interpenetrating phase composite was manufactured by
.It was found that under stress corrosion cracking (SCC) conditions and in the presence of hydrogen the mechanical properties of AE44 deteriorated. The change in the
.Abstract AE44-2 magnesium (Mg) alloys were fabricated by gravity casting (GC), high pressure die casting (HPDC), and high vacuum assisted high pressure die casting
AbstrAct Purpose: AE44 magnesium alloy allows attractive high temperature mechanical properties, as well as die-castability and good corrosion resistance. It contains magnesium,
.This Special Issue, entitled “Development of Advanced Aluminum and Magnesium Alloys: Microstructure, Mechanical Properties and Processing”, focuses on the latest progress
.The characteristics of defect bands in the microstructure of high pressure die casting (HPDC) AE44 magnesium alloy were investigated. Special attention was paid to the
It was found that under stress corrosion cracking (SCC) conditions and in the presence of hydrogen the mechanical properties of AE44 deteriorated. The change in the mechanical
Architectural Decoration: Used for trims, decorative panels, and other accents. Aluminum Alloy Strips Composition: Aluminum combined with other metals like copper, zinc, magnesium, or
.The chapter will relate to the sand cast and high pressure die cast magnesium alloys. Material for the research consisted of six magnesium casting alloys: AE44, AJ62,
.The characteristics of defect bands in the microstructure of high pressure die casting (HPDC) AE44 magnesium alloy were investigated. Special attention was paid to the
It was found that under stress corrosion cracking (SCC) conditions and in the presence of hydrogen the mechanical properties of AE44 deteriorated. The change in the mechanical
.The chapter will relate to the sand cast and high pressure die cast magnesium alloys. Material for the research consisted of six magnesium casting alloys: AE44, AJ62,
.The tensile properties and work hardening behaviour of die-cast magnesium alloy AE44 were investigated at a wide range of temperatures from 77 to 473 K and strain rates
Since the successful development of the world’s first AZ91 alloy sheet, which has high strength and superior corrosion resistance, we started the magnesium alloy business with the AZ91
Due to the low-density and high-specific strength, magnesium alloys are expected to enjoy increasing use in automotive and aerospace industries. However,
.To understand the relationship between the process-microstructure-mechanical properties of the high-pressure die-casting (HPDC) AE44 magnesium alloy, 3D reconstruction
.The research and development status of casting magnesium alloys including the commercial casting alloys and the new types casting alloys are reviewed, with more attention
.The microstructure and creep behavior of a high-pressure die-cast AE44 (Mg-4Al-4RE) alloy have been studied. The creep properties were evaluated at 423 K and 448 K (150
AlSi10Mg alloy has higher mechanical properties, corrosion resistance and lightweight structure. The AlSi10Mg alloy is also known as traditional casting alloy, and the alloy is widely used in
.The development of lightweight cast magnesium (Mg) alloys capable of operating at elevated temperatures is in strong demand for industrial applications, such as pistons and
.The research and development status of casting magnesium alloys including the commercial casting alloys and the new types casting alloys are reviewed, with more attention
.The microstructure and creep behavior of a high-pressure die-cast AE44 (Mg-4Al-4RE) alloy have been studied. The creep properties were evaluated at 423 K and 448 K (150
AlSi10Mg alloy has higher mechanical properties, corrosion resistance and lightweight structure. The AlSi10Mg alloy is also known as traditional casting alloy, and the alloy is widely used in
.The development of lightweight cast magnesium (Mg) alloys capable of operating at elevated temperatures is in strong demand for industrial applications, such as pistons and
Among the alloys evaluated, AE44 stands out with respect to die-castability, high-temperature creep resistance, and material cost. This paper collates the key results of our recent research
.The advancement of magnesium alloys has historically faced challenges due to their inherently low modulus and the inverse relationship between modulus and ductility. In this
.Microstructure and tensile creep behaviour of the die-cast AE44 and AJ62 magnesium alloys has been studied at temperatures between 175C
Ductility is improved at lower strain rates in AE44 and AM60, but it appears to be independent of strain rate in AZ91. The difference in strain-rate sensitivity among these alloys is considered to
.The thermal conductivity (TC) and strength trade-off has been a long-standing dilemma for developing high TC alloys. Here a novel high TC and cost-effective die-cast
Practical implications:AE44 magnesium alloy is used in automotive industry. Moreover, this alloy has a new potential application and results of investigations may be useful for preparing
.Mg-based MMCs can provide improved wear resistance and stiffness when suitable reinforcements are introduced. In previous work [9], the mechanical and tribological properties
.Magnesium alloys are the materials that are made when you combine magnesium with other elements like aluminum and zinc. These alloys are lightweight and have high
lt;pgt;To understand the relationship between the process-microstructure-mechanical properties of the high-pressure die-casting (HPDC) AE44 magnesium alloy, 3D reconstruction and 2D